Installation and Usage of Mini Catalizador
Share
I. Installation Steps
Preparation of Tools and Materials:
Ensure that you have purchased genuine Mini Catalizador and check its packaging for completeness.
Prepare necessary installation tools such as screwdrivers, wrenches, etc.
Vehicle Inspection:
Confirm that your vehicle is equipped with an M18x1.5mm threaded oxygen sensor.
Refer to the vehicle manual or consult a professional to determine the specific location of the oxygen sensor.
Removal of the Original Catalytic Converter:
Use tools to remove the original catalytic converter, and carefully note the steps and details during the removal process for subsequent installation.
Installation of Mini Catalizador:
Align Mini Catalizador with the oxygen sensor interface, ensuring a proper match.
Use tools such as screwdrivers or wrenches to securely fasten Mini Catalizador to the vehicle.
Check the installation for firmness, ensuring there is no looseness.
Testing and Adjustment:
Start the vehicle and observe whether the Check Engine Light (CEL) illuminates.
If the CEL light is on, check the installation of Mini Catalizador for correctness or consult a professional for adjustment.
II. Usage Precautions
Regular Inspection:
It is recommended to inspect Mini Catalizador's installation and operating status after driving a certain distance (e.g., 5000 kilometers).
If any abnormalities are found, promptly contact a professional for inspection and maintenance.
Avoid Impact:
During driving, try to avoid collisions or impacts on Mini Catalizador to prevent damage to its structure or affecting its performance.
Keep Clean:
Regularly clean the dust and debris around Mini Catalizador to ensure its normal operation.
Follow Instructions:
Strictly follow the operating methods and precautions in the product manual to avoid problems caused by improper use.
By following the above steps and precautions, you can easily install and use Mini Catalizador, adding peace of mind and protection to your driving experience. Additionally, we recommend purchasing genuine Mini Catalizador from reputable channels to ensure its quality and reliable performance.
Installation Steps:
- Jack up car if necessary, find extended bung which need to replace.
- Loosen old oxygen sensor spacer, bolt it on our new sensor spacer.
- Bolt new sensor spacer to pipe by hand firstly. Tighten with a wrench.
- Please click the link https://www.minicatalizador.com/pages/how-to-install to watch the installation video.